In cosmetic film-former fields including makeup, skincare and haircare, traditional acrylate film-formers feel sticky and poorly breathable; natural polymers lack water resistance and degrade easil......
2026-09-30In release paper and pressure-sensitive adhesive industries, conventional solvent-based release agents use organic solvents as carriers, causing high VOC emissions, flammability, toxicity and safet......
2026-09-30In release paper and pressure-sensitive adhesive industries, conventional solvent-based release agents use toluene or xylene as carriers, causing high VOC emissions, flammability, toxicity and safe......
2026-09-29In UV/EB curable anti-adhesive coatings and release agents, traditional silicones lack efficient photo-responsive groups, relying on thermal cure or peroxide vulcanization with high energy a......
2026-09-29In skincare and haircare cosmetic formulation, traditional mineral oil is occlusive, comedogenic, greasy and non-antioxidant; pure dimethyl silicone oil has limited compatibility with organics, is ......
2026-09-28In synthesis of heat-resistant phenyl silicone oils and high-polymer compounds, conventional octamethylcyclotetrasiloxane (D4) lacks phenyl groups and fails at high temperature; ordinary phenyl sil......
2026-09-28In paints, silicone rubbers and inorganic material interface modification, conventional tetraethyl orthosilicate (TEOS) offers high reactivity but overly fast ethoxy hydrolysis, short pot life, nar......
2026-09-24In silicone rubber and organosilicone compounding, fumed silica gives excellent reinforcement but at high cost, strong thickening, pronounced structurization and difficult dispersion with high mixi......
2026-09-24In high-temperature topcoat and weather-protective coating development, pure epoxy/polyester/acrylic organic resins yellow, lose gloss and crack above 400℃; conventional silicone coatings with poor......
2026-09-23In powder and high-weather coating development, pure epoxy or polyester systems yellow and chalk under prolonged heat, showing limited outdoor ceiling; thermoset acrylics weather well but lack high......
2026-09-23In powder and high-weather liquid coatings, pure epoxy or polyester powders extrude at low temperature but yellow, lose gloss and chalk under prolonged heat; thermoset acrylics weather well yet lac......
2026-09-22In high-temperature coating development, conventional epoxy or polyurethane films cure at room temperature but yellow, embrittle and delaminate above 300℃; bake-cure silicone resins cost high energ......
2026-09-22In high-end protective coatings and material modification, traditional epoxy or polyurethane coatings require high-temperature baking for full cure, energy-intensive and unsuitable for heat-sensiti......
2026-09-21In engineering plastic flame retardancy, traditional halogenated FRs offer high efficiency but release toxic smoke and corrosive gases, facing tightening environmental regulations; halogen-free pho......
2026-09-21In personal care and polymer modification, traditional polydimethylsiloxane offers silky feel but is fully nonpolar, poorly compatible with water-soluble actives, causing phase separation and silic......
2026-09-20
