In release paper and pressure-sensitive adhesive industries, conventional solvent-based release agents use organic solvents as carriers, causing high VOC emissions, flammability, toxicity and safety hazards; water-based release agents are eco-friendly but slow curing with poor water and weather resistance; UV-curable release agents need dedicated light sources and substrate transparency; ordinary solvent-free release agents with unstable release force or poor adhesion fail to meet stringent requirements of high-end "double-plastic double-silicone coatings". For specifications demanding "100% solids, solvent-free, fast curing, stable release force, adapted to double-plastic double-silicone", a strictly controlled solvent-free release agent places environmental protection, safety and high-end adaptation at one coating node. Addressing this, Anhui IOTA Silicone Oil Co., Ltd. launches Solvent-Free Release Agent IOTA 2301. Characterized by "solids content 100%; viscosity (25℃) 350mPa·s; release force 5-15g/25mm; application: release paper coating; features: safe use and fast curing, stable release force suitable for double-plastic double-silicone coatings, good adhesion and stable release force; packaging: 200L iron drum net 190kg, special 950kg IBC; transport as non-hazardous chemical; store sealed in cool dry place; brand IOTA", backed by "100% solids solvent-free + fast safe cure + double-plastic double-silicone fit", it serves as a solvent-free release agent for release paper coating. System Positioning: Solvent-Free Release Agent Among Release Agent Families Within release agent families, IOTA 2301 is a 100% solids single-component solvent-free system, distinct from traditional solvent-based release agents (organic solvent carrier, high VOC, flammable), water-based release agents (water-borne, slow cure, poor moisture resistance), UV-curable release agents (require UV light, substrate transparency limitation). IOTA 2301 uses solvent-free formula for eco-friendliness and safety, specifically optimized for "double-plastic double-silicone coating" scenarios, positioning as a dedicated solvent-free release agent for "high-end double-plastic double-silicone lines in release paper coating", rather than general solvent or UV-cure systems. Molecular Architecture: 100% Solids Fluid + Viscosity 350 + Release Force 5-15g/25mm + Non-Hazardous Logistics IOTA 2301 is a 100% solids fluid with zero volatile organic solvent. Viscosity 350mPa·s (25℃) balances flow and film formation for various coating methods; release force controlled at 5-15g/25mm, narrower and lighter than IOTA 2190, meets light release and precision PSA matching; solvent-free formula eliminates VOC emissions, safe to use; stable release force and good adhesion ensure consistent two-side release in double-plastic double-silicone coatings; transport as non-hazardous chemical lowers logistics compliance cost; packaging 200L iron drum 190kg net, special 950kg IBC fits different production scales. Performance Leap: From "Solvent Flammable Toxic, Ordinary Solvent-Free Fails Double Silicone" to "Solvent-Free Safe Cure, Double-Plastic Stable Release" With IOTA 2301, release paper coating improves jointly: eco-safety—100% solids solvent-free, environmentally friendly, safe use, non-hazardous transport; curing speed—fast cure raises line efficiency; double-plastic double-silicone fit—stable release force and good adhesion specially suit double-plastic double-silicone coatings, solving two-side release consistency; release performance—stable release force reduces defects and scrap; process tolerance—moderate viscosity, excellent adhesion; storage—cool dry sealed storage, no special explosion-proof facilities needed. Application Penetration: Release Paper Coating and Double-Plastic Double-Silicone Coatings IOTA 2301 core covers release paper coating. Release paper coating: double-plastic double-silicone coating lines—emphasizing stable release force, good adhesion, two-side consistency; trial and adjust per coater speed and substrate. ⚠️ Taboo: store sealed in cool dry place, avoid heat and moisture; though non-hazardous transport, avoid mixing with strong oxidants; ventilate work area; use soon after opening. IOTA Technical Guide: Drum/IBC Pack, Coating Application, Cool Sealed Storage IOTA 2301 is a solvent-free fluid in 200L iron drum 190kg net, special 950kg IBC. Ensure substrate clean and dry before application; apply by knife coating, roller or spray, then cure. Store sealed in cool dry place, FIFO. Industry Insight: Solvent-free release agent selection is not the higher solids the better, but using viscosity for coating method and machine speed, release force for PSA match and light-release precision, double-plastic double-silicone adaptability for high-end line access, transport class for logistics cost. For release paper producers, IOTA 2301 uses one 100% solids, viscosity 350mPa·s, release force 5-15g/25mm solvent-free release agent across eco-safety and double-plastic double-silicone high-end coatings, taking solvent-free safe cure and double-plastic stable release as batch-checkable anchors, securing double-silicone release consistency and work environment simultaneously.