In release paper and label tape coating, traditional solvent-borne release agents contain large amounts of volatile organic solvents, posing fire hazards and high exhaust treatment costs; water-borne release agents dry slowly with high energy consumption; common solvent-free release agents suffer poor adhesion and unstable release force; hot-melt release requires high temperature, risking thin paper deformation. For specs demanding "solvent-free eco-friendliness + fast curing + ultra-light and stable release force", a strictly controlled solvent-free release agent places safety and release performance at one coating node. Addressing this, Anhui IOTA Silicone Oil Co., Ltd. launches IOTA 2211 Solvent-Free Release Agent. Solid content 100%; viscosity (25℃) 350 mPa·s; release force 3-5 g/25mm; for release paper coating; features: safe use, fast cure, ultra-light release, good adhesion, stable release force; 200L iron drum net 190kg, special 950kg IBC; non-dangerous chemical transport; cool dry sealed storage; brand IOTA. System Positioning: Solvent-Free Release Agent Among Release Families Within release agents, IOTA 2211 is a solvent-free fast-cure release agent, distinct from solvent-borne (VOC, flammable), water-borne (slow dry, high energy), hot-melt (high temp, substrate limit), cold-coated silicone oil (no crosslink, transfer risk). IOTA 2211 uses 100% solid to eliminate solvent volatility, positioning as a dedicated solvent-free release agent for "release paper/film coating + label tape ultra-light release + safe fast production line", rather than solvent-diluted silicone or hot-melt adhesive. Molecular Architecture: Solvent-Free Curable Silicone System + 100% Solid + Viscosity 350 mPa·s + Release 3-5g IOTA 2211 core is a solvent-free curable silicone formulation (specific composition undisclosed). 100% solid means all active content forms film, no VOC pinholes or pollution; viscosity 350 mPa·s (25℃) fits roll coating, knife coating, micro-gravure; release force 3-5 g/25mm falls in ultra-light range, meeting label, tape, medical dressing needs; cured crosslinked silicone film gives good adhesion and long-term stable release without decay. Performance Leap: From "Solvent Hazard, Release Drift" to "Solvent-Free Fast Cure, Ultra-Light Release" With IOTA 2211, four-way synergy: eco-safety—solvent-free eliminates VOC, non-DG transport lowers logistics risk; cure speed—fast cure fits high-speed coating lines, raising output; release—ultra-light 3-5g consistent, good adhesion prevents coating transfer; process—moderate viscosity, ready-to-coat, 190kg drum and 950kg IBC cover small to large lines. Application Penetration: From Release Paper Coating to Label Tape Ultra-Light Release IOTA 2211 covers one core scenario.

• Release paper/film coating: glassine, kraft, PET film—ultra-light release and stable demold; per coating method (roll/knife) and substrate absorbency trial.

⚠️ Taboo: though non-DG, store cool dry sealed, avoid high heat and open flame; ensure substrate clean dry before coating; reseal unused product to prevent contamination and skinning; avoid strong acid/base and organic solvents. IOTA Technical Guide: 200L Drum 190kg / 950kg IBC, Non-DG Transport IOTA 2211 in 200L iron drum (net 190kg), special 950kg IBC. Apply directly onto release paper substrate; cure per production process. Store sealed cool dry; transport as non-dangerous chemical. Industry Insight: Solvent-free release agent selection is not the higher solid content the better, but using viscosity for coatability, release force for application match, cure speed for line efficiency, non-DG for logistics safety. For release paper producers and label coating engineers, IOTA 2211 uses one solvent-free release agent across eco-safety and ultra-light release, taking solvent-free fast cure and ultra-light release as batch-checkable anchors, securing release stability and production safety simultaneously.