Alkyl-Aryl Emulsion, Lubricating Release in One — IOTA 28027E Redefining High-Temp Release New Lubri-Release

Hits: 72 img


In die-casting release, metal hot lubrication, fiber spinning and personal-care conditioning, ordinary methyl silicone emulsions are too hydrophilic and bleed, charring under high heat; pure phenyl emulsions are costly, hard to emulsify and film-hard; polyether silicone emulsions cap low on heat and yellow; mineral-oil release leaves heavy residue, needs frequent mold cleaning and hurts downstream coating adhesion. For demands of "long-chain alkyl oil-affinity + aryl heat resistance with low char + siloxane slip and hydrophobicity + water-borne workability", a strictly controlled aryl-alkyl polysiloxane emulsion welds lubrication, release and heat stability at one water-based system. Addressing this, Anhui IOTA Silicone Oil Co., Ltd. launches IOTA 28027E Long-Chain Alkyl Silicone Emulsion. Chemical name aryl alkyl polysiloxane emulsion. Active: long-chain alkyl arylalkyl-modified polysiloxane dispersed in water by advanced emulsification. Appearance milky white liquid. Solids 50±2%. Combines siloxane softness and weather resistance with long-chain alkyl and aromatic lipophilicity, lubrication and adhesion. Forms uniform durable film on many substrates, giving slip, gloss, hydrophobicity and wear resistance. Applications: metal lubrication, die-cast release, plastic modification, filament spinning, oil additives, personal care. Package: standard 180kg plastic drum, small drum and IBC available. Store sealed, cool, dry, ventilated, away from fire/heat/sunlight. Transport as general silicone liquid chemical. Shelf life 12 months sealed original. Brand IOTA. System Positioning: Alkyl-Aryl Silicone Emulsion Among Modified Silicone Emulsions Within functional silicone emulsion families, IOTA 28027E is a long-chain alkyl and arylalkyl co-modified polysiloxane water emulsion, distinct from ordinary methyl silicone emulsion (hydrophilic, bleeds, chars hot), pure phenyl emulsion (costly, hard emulsifying, hard film), polyether silicone emulsion (low heat ceiling, yellowing), mineral-oil release (heavy residue, hard cleanup, bad for recoating). IOTA 28027E uses long-chain alkyl for lipophilic adsorption on metal and organic substrates, aryl for thermal stability and film integrity, siloxane backbone for low friction and hydrophobic base, positioning as "low-char die-cast release emulsion + metal high-temp water lube film + filament spin-finish component + plastic internal slip and personal-care conditioning agent", rather than a mere slip additive or common water-repellent emulsion. Molecular Architecture: Long-Chain Alkyl + Arylalkyl Graft + 50±2% Water-Borne + Stable Milky System IOTA 28027E oil phase is a co-modified oligomer where some methyls on the polysiloxane backbone are replaced by long-chain alkyl and arylalkyl groups, external phase water. Long-chain alkyl side groups strengthen dispersion interaction with metal, hydrocarbons and resins, lowering contact angle so the hot film "bites" the mold under high-pressure spray without reflux or droplet pooling; arylalkyl side groups absorb thermal energy through conjugation and buffer thermo-oxidation, resisting chain scission and carbonization at high cavity temperature, leaving far less char than mineral or wax systems; retained siloxane segments give low friction, gloss and hydrophobic filming. Milky liquid at 50±2% solids balances transport efficiency and on-site dilution; after water flashes off, a uniform, dense, low-residue silicone film remains. Performance Leap: From "Char After Release, No Paint After Coating" to "Alkyl-Aryl Emulsion, Lubricating Release in One" With IOTA 28027E, four-way synergy: low-char release—in die-casting and hot forging, water flashes instantly, silicone film anchors steadily, ejection force stable, casting surface clean, mold-cleaning cycle notably extended; high-temp lubrication—metal hot rolling, extrusion and screw water-lube carrier with no flash fire, no coking, cooling and lubricating together; organic affinity—long-chain alkyl lifts compatibility with mineral oil, resin and wax; in spin finish it gives cohesion, smoothness and antistat synergy, no yellow char on hot godets; surface tuning—plastic internal slip lowers screw torque, personal-care upgrade gives dry spread and silky feel without fake slip. Application Penetration: From Die-Cast Mold to Shampoo Bottle IOTA 28027E covers five core scenarios.
  • Die-casting and hot work: Al/Mg/Zn die casting, hot forging—low char; stable film above 250℃, clean castings ready for downstream coating.
  • Metal water-borne lube: hot rolling, extrusion, screw compressor lube—point-plus-lubrication; no coking, no flash fire.
  • Fiber and plastic: high-speed spin finish, plastic internal slip and anti-block—smooth cohesion; fewer breaks, less white powder, better process flow.
  • Oil and industrial additive: cutting fluid, grease, oil modification—lipophilic compatibility; lower friction, stable system.
  • Personal care: hair, skin, color cosmetic silicone upgrade—slip conditioning; long-chain spread, aryl gloss, non-greasy silicone feel.
⚠️ Taboo: water-borne system must be frost-free and heat-stable, store sealed cool ventilated away from sunlight and damage; dilution water control hardness and electrolytes—hard water or ions cause breaking and creaming; compatibility centrifuge test before blending with other water-borne systems; keep from fire and heat though water-borne, handle as general silicone liquid chemical; use within 12 months sealed original, consume soon after opening to avoid contamination. IOTA Technical Guide: 180kg Plastic Drum, Sealed Cool Store 12 Months IOTA 28027E is milky white liquid. Release: dilute with water per site condition and spray; water flashes, silicone films on mold and part. Metal lube and spin finish: blend directly or dilute by target solids. Plastic modification: adsorb emulsion on powder then melt-disperse. Personal care: add gradient-wise by compatibility. Package standard 180kg plastic drum, small drum/IBC customizable. Store dry, cool, ventilated, sealed, away from fire/heat/sunlight. Transport as general silicone liquid chemical, prevent leakage. Shelf life 12 months sealed original. Industry Insight: Water-borne modified silicone selection is not the higher solids the better, but using long-chain alkyl for oil-affinity, aryl for heat-low-char, siloxane backbone for slip-hydrophobic, emulsion system for dilution stability and anti-break. For die-cast process engineers, spin-finish formulators and personal-care developers, IOTA 28027E uses one alkyl-aryl silicone emulsion across release, lubrication, spinning and conditioning, taking alkyl-aryl emulsion and lubricating release in one as batch-checkable anchors, securing stable film, low char and downstream-friendly results.

Recommend

    Online QQ Service, Click here

    QQ Service

    What's App